WM8150 |
RFQ for WM8150 Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| WM8150 | - | - | 07/08+ |
The WM8150 is a 12-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 8MSPS.
The device includes a complete analogue signal processing channel containing Reset Level Clamping, Correlated Double Sampling, Programmable Gain and Offset adjust functions. Internal multiplexers allow fast switching of offset and gain for line-by-line colour processing. The output from this channel is time multiplexed into a high-speed 12-bit Analogue to Digital Converter. The digital output data is available in 4-bit wide multiplexed format.
An internal 4-bit DAC is supplied for internal reference level generation. This may be used during CDS to reference CIS signals or during Reset Level Clamping to clamp CCD signals. An external reference level may also be supplied. ADC references are generated internally, ensuring optimum performance from the device.
Using an analogue supply voltage of 5V, a digital core voltage of 5V, and a digital interface supply of either 5V or 3.3V, the WM8150 typically only consumes 160mW when perating from a single 5V supply.
Typical Application |
Features |
| • Flatbed and sheetfeed scanners• USB compatible scanners• Multi-function peripherals• High-performance CCD sensor interface | • 12-bit ADC• 8MSPS conversion rate• Low power - 170mW typical• 5V single supply or 5V/3.3V dual supply operation• Single channel operation• Correlated double sampling• Programmable gain (8-bit resolution)• Programmable offset adjust (8-bit resolution)• Programmable clamp voltage• 4-bit wide multiplexed data output format• Internally generated voltage references• 20-pin SSOP package• Serial control interface |
| CONDITION | MIN | MAX |
| Analogue supply voltage: AVDD | GND - 0.3V | GND + 7V |
| Digital core voltage: DVDD1 | GND - 0.3V | GND + 7V |
| Digital IO supply voltage: DVDD2 | GND - 0.3V | GND + 7V |
| Digital ground: DGND | GND - 0.3V | GND + 0.3V |
| Analogue grounds: AGND1 − 2 | GND - 0.3V | GND + 0.3V |
| Digital inputs, digital outputs and digital I/O pins | GND - 0.3V | DVDD2 + 0.3V |
| Analogue input (VINP) | GND - 0.3V | AVDD + 0.3V |
| Other pins | GND - 0.3V | AVDD + 0.3V |
| Operating temperature range: TA | 0°C | +70°C |
| Storage temperature prior to soldering | 30oC max / 85% RH max | |
| Storage temperature after soldering | -65°C | +150°C |
| Package body temperature (soldering, 10 seconds) | +260°C | |
| Package body temperature (soldering, 2 minutes) | +183°C | |
| Models | MFG | Pack |
| WM81181 | ||
| WM8137 | ||
| WM8141CFT/V | ||
| WM8142-12CDT | ||
| WM8143-12C | ||
| WM8143-12CFT/V | ||
| WM8144-10 | 08+ | |
| WM8144-12 | QFP | |
| WM8144CPT | ||
| WM8148CFT | ||
| WM8150 | ||
| WM8152CDS/R | ||
| WM8152S | ||
| WM8152SCDS/R | ||
| WM8154S | ||
| WM8167 | ||
| WM8192 | SOP28 | |
| WM8192CDW/RV | ||
| WM8196CDS | ||
| WM8196CDS/R |
